Bypassing Alarm System Trouble Sensors

To Bypass A Specific Sensor On Your Alarm Panel, Please Follow The Following Easy Steps:

  1. Look For The Number Of The Sensor Your Having Issues With.
    1. Window 1 - Sensor 03
    2. Window 2 - Sensor 04
  2. Enter Usercode Then Press 6 - Zone Number Including Any 0's
    1. 0618 6 03
    2. 0618 6 04
    3. Use The Same Format For Other Bypasses - Just Use Sensor Number
  3. Panel Will Beep Then Bottom Right Corner Will Say "BYPASS"
  4. If You Press The Star * Key X2 You Should Hear The Panel Say System Ready To Arm Zones Bypassed Or System NOT Ready To Arm Zone Bypassed.

 I found this article helpful. (0)

 

Leave a Response